Restaurant epoxy Flooring for Mexican Grill

A freind of mine that does all of our cement finishing referred me to a general contractor that had recently had a self-leveling floor poured By one contractor and then finished
by another contractor with a microtopping. The customer was not happy with the floor finish and I was asked to look it over. On arrival I found that the floor was very uneven. Some areas were a quarter of an inch thick where and other areas were 1/8 of an inch thick. All of it was delaminating.

Unfortunately the only option was to remove the micro topping completely and because the self-leveling was not manufactured by any of the companies that manufacture Microtoppings no micro topping manufacturer was willing to sanction an installation.

We have had quite a bit of experience with the our epoxy on self-leveling’s and I felt that that would be the best solution

As three phase power was not available we brought in a generator and removed the micro-topping from 1400 square-foot this resulted in over 3000 pounds of dust that we put into the contractors bin.

We installed our clear Epoxy and the floor looks fabulous!



Costco Woodbridge Epoxy Floor Repairs

When our friend Bruce from Costco Woodbridge cold
and let me know that he was getting new ovens for the bakery in less than a week
we mobilized for an overnight shift and repaired the floor under the picking up Ben’s and replaced it for a new polyurethane cement floor
We had all of the Epoxyguy’s there that night and we did a Another patch in the bakery half of the chicken cooking area and an area in the restaurant

all areas were ready for service by 7 AM the next day!!!